S13/S14/S15 SUS321 Stainless Steel SR20DET Exhaust Manifold
SUS321 Grade Stainless. TIG Welded and Polished. Cast Stainless flanges and Tabs welded in to prevent cracking and heat fatigue. Metal gaskets and studs are included although not pictured. Gain 10+rwkw, greater low down torque and reduce turbo lag. Compliments Dump Pipe upgrade and high flow exhaust. 12 month limited warranty against cracking. We run this on our S14 Track car with great sucess at Phllip Island and Sandown. Dyno charts available soon!

$325

S13/S14/S15 SUS304 Stainless Steel T25/T28 TOMEI Design 3" Dump
SUS304 Grade Stainless. TIG Welded and Polished. CNC Machined Cast Stainless Flanges. Metal gaskets and studs are included. Gain more top end power, greater low down torque and reduce turbo lag. Compliments Exhuast Manifold upgrade and high flow exhaust.

Fitting Available at the Melbourne Workshop for $40

$149

S13/S14/S15 SUS304 Stainless Steel T25/T28 TOMEI Design 3" Front Pipe
SUS304 Grade Stainless. TIG Welded and Polished. CNC Machined Cast Stainless Flanges. Metal gaskets and studs are included. Gain more top end power, greater low down torque and reduce turbo lag. Compliments Exhuast Manifold Upgrade, TOMEI Dump Pipe and Cat back exhaust Combined with Highflow Cat. Complete Exhaust Systems will be avaiblle soon!

Free Fitting with Tomei Dump Pipe.

$179

S13/S14/S15 R32/R33/R34 SUS304 Stainless Steel T25/T28 TOMEI Design 3" Catless Pipe
SUS304 Grade Stainless. TIG Welded and Polished. CNC Machined Cast Stainless Flanges. For race use only - No Cat means less back pressure and more power throughout the rev range.

Free Fitting with Tomei Front Pipe.

$125

Genuine APEX'i Universal Power Intake Filter
Imported from Japan Direct, The Dual Funnel Power Intake evolved from the highly successful Super Intake also made by Apex'i. Subtle refinements in the design and filter element resulted in a 10% reduction in pressure drop. Utilizing an upper and lower funnel, the Power Intake reduces air turbulence within the filter and creates smooth air flow into the throttle body. The Power Intake is a maintenance-free dry-type air filter and will alleviate the problem of filter oil from "wet" air cleaners interferingwith the air-flow meter. Because the filter is a pure cotton element, it contains no oil and is ADR Safe. Accept no imitations.

$139